Basic systems

Example image of a standard system

EcoBox is Filtraglass’s basic model specially designed for use with bevelling and edging machines.


The machine operates with the same pressure column filtration system as the standard machines offering the same efficiency and environmental protections but at a lower cost thanks to a simpler set up.


The EcoBox is quick and easy to install and only requires the original water tank to be replaced and the system to be assembled.

How does it work?

The system collects and stores the water from the different glass processing machines in a tank. From there, the dirty water is pumped to the pressure cylinder where the filter column is located, separating the water from the dust, allowing the clean water that is ready to be reused to pass through to a new section of the tank, and retaining the dust on the outside in the filter mesh.

On a regular basis, when the machine detects a particular build-up of dust, it dries and compresses the glass dust stuck to the column, discharging it in the form of dry, solid, recyclable residue. This whole cyclical process is fully automatic, requires no staff and does not lead to production line stoppages.

Computer numeric control

All Filtraglass systems can offer optimal quality water for the spindles of CNC, introducing the following changes into them: the installation of a photocell, a pneumatic solenoid valve system, an additional tank for extra clean water and, optionally, a pump set.

Thanks to this supplementary system, extra-clean water can be used in CNC spindles, as an alternative to the use of mains water.

Advantage
  • Closed loop water circuit
  • Recycling of 100% of the treated water
  • Reduction in consumption of water and cutting oil
  • Reduction of maintenance costs
  • Obtaining of dry waste
Quality
  • Improvement of the geometric quality
  • Improvement of the final finish
  • Treated water that is suitable for CNC machine spindles
  • Decrease of breakages in production
  • Respect for the environment
Efficiency
  • 100% recyclable inorganic waste
  • Increase of the useful life of the machines
  • Increase of the cutting speed
  • Better performance of the diamond grinding wheels
  • No stoppages in the production line
EcoBox EcoBox Plus EcoBox CNC
Filtration system Pressure column Pressure column Pressure column
Machine dimensions 800 x 600 x 1700 mm 800 x 600 x 1800 mm 800 x 600 x 2300 mm
Water tank dimensions 2000 x 1000 x 400 mm 2000 x 1000 x 1000 mm
3000 x 1500 x 400 mm
3000 x 1250 x 1000 mm
Machine weight 120 kg 120 kg 120 kg
Tank capacity 800 l 2.000 l 3.750 l
Dry residue extraction 8-12 kg/h 8-12 kg/h 8-12 kg/h
Rated flow of pump 50 l/min 50 l/min 50 l/min

Consent to the use of Cookies:

We use own and third party cookies for analytical purposes. You can get more information about cookies reading our Privacy Policy and our Cookies Policy

Accept and continue Reject cookies