Large volumes systems
Filter press for high flow rates

Filtraglass also boasts XtremFlow, a model designed for large volumes of water. Unlike the other systems, XtremFlow filters the water using a filter press system, i.e. it separates the glass particles suspended in the water by pushing the liquid through the filter plates at high power.
This model is able to filter very large amounts of water per minute and can also be tailored to the flow rate required by each client.
How does it work?
The system collects and stores the water from the different glass processing machines in a tank. From there, the dirty water is pumped to the pressure cylinder where the filtering plates are located, separating the water from the dust, allowing the clean water that is ready to be reused to pass through to a new section of the tank, and retaining the dust on the outside in the filter mesh.
On a regular basis, when the machine detects a particular build-up of dust, it dries and compresses the glass dust stuck to the filter mesh, discharging it in the form of dry, solid, recyclable residue. This whole cyclical process is fully automatic, requires no staff and does not lead to production line stoppages.
Computer numeric control
All Filtraglass systems can offer optimal quality water for the spindles of CNC, introducing the following changes into them: the installation of a photocell, a pneumatic solenoid valve system, an additional tank for extra clean water and, optionally, a pump set.
Thanks to this supplementary system, extra-clean water can be used in CNC spindles, as an alternative to the use of mains water.
Advantage
- Closed loop water circuit
- Recycling of 100% of the treated water
- Reduction in consumption of water and cutting oil
- Reduction of maintenance costs
- Obtaining of dry waste
Quality
- Improvement of the geometric quality
- Improvement of the final finish
- Treated water that is suitable for CNC machine spindles
- Decrease of breakages in production
- Respect for the environment
Efficiency
- 100% recyclable inorganic waste
- Increase of the useful life of the machines
- Increase of the cutting speed
- Better performance of the diamond grinding wheels
- No stoppages in the production line
XF220
| Sistema de Filtraje | Filter membrane |
|---|---|
| Dimensiones Máquina | 2500 x 1000 x 1900 mm |
| Dimensiones Tanque de Agua | 3000 x 1500 x 1500 mm |
| Peso de la Máquina | 500 kg |
| Capacidad del Tanque | 6700 l |
| Extracción de Residuo Seco | 30 – 40 kg |
| Caudal Nominal de la Bomba | 12 m3/h |
XF420
| Sistema de Filtraje | Filter membrane |
|---|---|
| Dimensiones Máquina | 4000 x 1400 x 2200 mm |
| Dimensiones Tanque de Agua | 4000 x 1500 x 1500 mm |
| Peso de la Máquina | 1,100 kg |
| Capacidad del Tanque | 9.000 l |
| Extracción de Residuo Seco | 140 – 160 kg |
| Caudal Nominal de la Bomba | 24 m3/h |
XF620
| Sistema de Filtraje | Filter membrane |
|---|---|
| Dimensiones Máquina | 4900 x 1600 x 2700 mm |
| Dimensiones Tanque de Agua | 4000 x 1500 x 1500 mm |
| Peso de la Máquina | 3250 kg |
| Capacidad del Tanque | 9.000 l |
| Extracción de Residuo Seco | 240 – 260 kg |
| Caudal Nominal de la Bomba | 43 m3/h |
| XF220 | XF420 | XF620 | |
|---|---|---|---|
| Sistema de Filtraje | Filter membrane | Filter membrane | Filter membrane |
| Dimensiones Máquina | 2500 x 1000 x 1900 mm | 4000 x 1400 x 2200 mm | 4900 x 1600 x 2700 mm |
| Dimensiones Tanque de Agua | 3000 x 1500 x 1500 mm | 4000 x 1500 x 1500 mm | 4000 x 1500 x 1500 mm |
| Peso de la Máquina | 500 kg | 1,100 kg | 3250 kg |
| Capacidad del Tanque | 6700 l | 9.000 l | 9.000 l |
| Extracción de Residuo Seco | 30 – 40 kg | 140 – 160 kg | 240 – 260 kg |
| Caudal Nominal de la Bomba | 12 m3/h | 24 m3/h | 43 m3/h |


